Category: Uncategorized

Por que os apartamentos pequenos custam mais pela imobiliária?

Reading time:

Muitas pessoas querem buscar os apartamentos a venda em sorocaba e quase sempre se assustam com o valor pedido. A imobiliária que for de qualidade vai te ajudar a compreender essas questões e deixará a sua vida bem melhor.

Outro tipo de atitude que vai merecer atenção é buscar entender que isso é algo que vai trazer mais segurança. Esse tipo de coisa vai merecer muita atenção, porque fechar negócios sem pensar assim, pode ser perigoso.

http://www.paulasantos.com.br/imoveis/a-venda/apartamento/sorocaba

A melhor coisa que você pode fazer é simplesmente manter a calma e isso vai fazer sentido a todos. Uma boa imobiliária sempre vai cobrar mais e no final você verá que isso fez sentido de forma positiva no final.

O problema é simplesmente não ter a pressa, porque quando isso acontece tudo pode piorar cada vez mais. Aqueles que não se esquecerem desses detalhes vão ver que isso foi positivo e no final fez sentido de forma positiva.

A imobiliária em questão precisa valorizar cada vez mais a segurança e isso terá um preço um pouco maior.

Overvoltage and Support Protection

Reading time:

In a ground-neutral system, the protection of the transformer can be made by isolating the earth tank or by means of an intensity transformer in which an overcurrent relay is installed.

The overload protection is designed to protect the insulation of the windings against damage caused by heating. Generally the transformers have a temperature indicator on the top of the oil, which can trigger an alarm contact by means of a capillary tube.                  gates 4L880

There may also be used thermal relays, direct or secondary, which have an instantaneous tripping or timing device.

As for back-up protection, the transformer must be protected against overheating caused by the delayed circulation of fault currents. This protection can be carried out if there is support protection provided by other means, eg generator protection.

The protection functions are those that are addressed in addition to the protection functions approach, the parameter values ​​are also indicated.

After investigating several protection relays, it was decided to adopt the multifunction relay to carry out the alternator protections. The main functions are guaranteed in duplicate, while the other protection functions are guaranteed by the DTP-B and GPM-F-H relays.

 

A imobiliária deixa os apartamentos com mais chance de serem vendidos?

Reading time:

Com toda a certeza que sim e a razão para afirmar isso é muito simples: as pessoas vão procurar muito mais. A melhor imobiliária pode aumentar as suas chances e assim você terá a chance de conseguir os seus objetivos.

Aqueles que tiverem essa capacidade vão conseguir enxergar o panorama com muito mais facilidade do que os outros. Lembre-se que uma boa imobiliária tem a chave para que você consiga encontrar o melhor apartamento a venda em itaquera.

Com os apartamentos a situação é a mesma e isso deixa para todos uma vantagem muito importante. Já que é devido a esse fato que as pessoas procuram e a chance de vender é maior, tudo devido a essa procura.

Busque esse entendimento e você verá que a melhor escolha para você é aproveitar essas vantagens. Uma empresa de qualidade terá mais do que uma opção e deixa mais simples a ideia de comprar um imóvel.

A imobiliária sabe disso e por isso faz a comercialização, trazendo para você essa e muitas outras vantagens primordiais.

http://www.kaluaimoveis.com.br/imoveis/a-venda/apartamento/sao-paulo/itaquera

Harmonics x Capacitors

Reading time:

The application of capacitors in circuits with harmonic components must be done with discretion avoiding to cause problems for the life of the capacitor and for the system as a whole. Every circuit that acts with devices that alter the waveform of the current and the fundamental voltage of power, has harmonic components. The amplitude and frequency of these harmonics will depend on the type of equipment used, its power and the essential values ​​of the circuit and equipment connected to it.

We can conclude that their impedance will be smaller the greater the frequency of the network, since the impedance is inversely proportional to the frequency. Such an effect will make the capacitor a “low impedance” path for harmonic circulation, causing a large part of the harmonic currents generated to pass through the capacitor.

It should be remembered that the capacitors “do not generate” harmonics, but they are victims of their effects. It is also observed that certain circuits may have their harmonic values ​​increased in intensity after the installation of capacitors in them, since these tend to decrease the general impedance of the circuit for frequencies above the fundamental.

https://www.mrosupply.com/hydraulics-and-pneumatics/hose-reels/hose-reel-parts/773473_s601013-35_reelcraft/

Multiple Winding Transformers

Reading time:

Multiple winding or n-winding transformers are used when there are more than two circuits with different voltages that need to be connected to each other.

As for single-phase transformers, the need to understand and study the behavior of currents, voltages and fluxes for multiple winding transformers has led to other equivalent circuit models.

The Cantilever model reveals to be correct for the modeling of this type of transformers since the parameters of the transformer can be directly calculated. In turn, the N-Port model can also be used for the modeling of multi-winding transformers, and it is analytically possible to determine the transformer parameters required for modeling.

Models for multiple winding transformers have been elaborated based on the magnetic geometry of the transformer when its inductances and reluctance are required. Applying the Faraday’s Law, relating the magnetic fluxes to the voltages running through the turns of the transformer, we express the currents that run through each loop through the magnetic fluxes.

The transformer is responsible for the interconnection of three-phase systems to two-phase systems and as such its construction is performed following the view of the construction of a three-phase transformer which, as previously mentioned, can be carried out by a bank of transformers.

https://www.mrosupply.com/synchronous-belts/speciality-timing-belt/557331_5m319090_boston-gear/

Alternating Current x Continuous Current

Reading time:

The typical alternating current voltages in the transmission lines are from 69 kV to 750 kV. Voltages from 69 kV to 500 kV are normally transmitted in alternating current and for values ​​greater than 500 kV, it will be necessary to carry out a study to know if it is economically feasible to transmit in alternating or continuous voltage. For example, in the Itaipu hydroelectric plant, the 750 kV line and the alternating voltage line is that of 600 kV, continuous.

When the transmission is made in direct current, a rectifying substation transforms the alternating voltage into continuous. This voltage is established at all points of the transmission line until reaching the consumption centers, where an inverter station converts it to alternating voltage, before distributing it to consumers.

An important aspect of DC transmission is the reduction of losses in the transmission line. The electric power distribution stage starts at the voltage lowering substation. First, the transmission line voltage is reduced to the default values ​​of the primary distribution networks.            boston cluthes brakes

The voltages are distributed to three-phase transformers, which can serve single-phase, two-phase or three-phase consumers. The voltage in the primary distribution network is 13.8 kV and, when passing through the transformer, reduces to 127 V and 220 V.

 

 

Transformer Over-excitation

Reading time:

The magnetic flux inside the transformer is directly proportional to the applied voltage, and inversely proportional to the frequency of the system. Overvoltage and / or underfrequency can cause levels of magnetic flux that can lead to transformer iron saturation.

The use of this relay is justified because, at the moment of over-excitation, the relation V / f will be different from the relation noticed in steady state. When over-excitation occurs, the V / f relay inhibits the differential protection.

Over-excitation of the transformer can cause heating, promoting excitation current, noise and vibration.

During load rejection and other operating conditions, the transformer may be subject to permanent overvoltages. Under these conditions, a high content of odd harmonics is observed, emphasizing the ones of 3a and 5a. This generates the birth of unwanted differential currents, which can generate a misguided performance of differential protection.

To avoid this problem, we can take advantage of a protection against over-excitation: at the moment it acts the differential protection does not act. An alternative is the relay V / f (frequency ratio) in conjunction with the differential relay.

https://www.mrosupply.com/sheaves/split-taper-browning-style-sheave/2285205_2b5v136_browning/

The Induction Motors

Reading time:

Single-phase induction electric motors have only one phase, being powered by a single-phase alternating current and are generally very often applied when a smaller motor with smaller power is required.

The induction motors employ a rotor called the squirrel cage, which has a special device for starting and the main advantage considered to it, is its low cost for small powers. This special device consists of a starting winding attached to the stator.

Single-phase motors, because they only have a single power supply, do not have a rotating field, like polyphase motors, they do have a pulsating magnetic field. This factor will allow the impedance so that they have conjugate to the starting, since in the rotor, if they induce magnetic fields aligned with the field of the stator.

The process in which only the stator is connected to the mains supply, affects the main factor that distinguishes the induction motor, where the rotor is not fed from the external side, and the chains that circulate freely in it, are electromagnetically induced by the stator, comes hence the origin of its induction motor name.

https://www.mrosupply.com/sheaves/light-duty-sheaves/qd-bushed/2278427_bk140h_browning/

CLASSIFICATION OF ENGINES

Reading time:

DC motors are used in many applications, some of which require the speed to remain constant as the load applied to the motor shaft changes. In others it is necessary to vary the speed within a certain range. It is important to know the speed curve as a function of torque. DC motors are rated according to the field winding connections.

In the motor with independent excitation the field winding is connected to an independent voltage source and the armature winding is connected to another source, having no connection between the two windings. In the branch motor the armature winding and the field winding are placed in parallel and connected to a continuous power supply reelcraft 601015-15. The engine in series exhibits a great variation of speed as the torque developed by the engine increases and should not be used without load.

The composite excitation motor is a combination of series type and bypass type motors. A winding composed of winding with many turns of fine wire, connected in parallel with the armature winding, and another with few turns of coarse wire, connected in series with the armature winding.

Obtaining Rotation Inversion

Reading time:

It can be said that due to different factors, such as its simplicity, low cost and robustness, are recommended for specific applications, such as in the case of need of air movement, such as in ambient air purifying devices, exhaust fans, fans, units which have the purpose of cooling, clothes dryers and also hair dryers, small pumps and compressors, slide projectors, turntables in general, and domestic applications, among others. However, even considering its simplicity and reduced cost, the design of this type of motor 3074001P25, can be extremely complex, involving concepts of double rotating field, cross fields and a very complex electromagnetic theory.

Thus, it is concluded that there are several ways of achieving the reversal of rotation, although one of them can be considered much more expensive if compared to other methods. In relation to the performance obtained, motors with a distorted field can usually have a low starting torque, which can vary from 15% to 50% of the nominal, a performance and power factor, considerably low. By all these factors, they are usually designed for small powers, ranging from a few thousandths of a hp to a quarter hp.

Experiments and Studies on the Magnetic Field

Reading time:

It can be said that in the proper connection between electricity and magnetism, there was also the English Michael Faraday. He valued experience as evidence of natural phenomena. It was thanks to his experiences and his curiosity, he was able to demonstrate in 1822 the circular magnetic field. In this way, the relationship between magnetism and electricity was established m355 baldor. The French physicist André-Marie Ampere, after knowing the experiments of the Dane, began to create a law of electromagnetism, understanding that the lines of force created by the electrified wire, the magnetic field, are circular, that is, they form an invisible cylinder around of the driver.

Thus, by a simple experiment, in the year 1820, the Danish scientist Hans Christian Oersted discovered a physical principle of extreme relevance for the proper operation of the electric motor. The scientist passed an electric current, generated by a normal heap, by a conductive wire and soon after it approached a compass of that wire. The needle, which acts magnetically, moved and aligned perpendicular to the thread. For Oersted, the event confirmed that around the wire, had a magnetic field, which acted on the field of the needle. Until now, it was thought that the magnetic field moved only in a straight line, as from one magnet to another.

Operation of Biphase Induction Motors

Reading time:

In the middle of 1887, the physicist Tesla designed and manufactured a first prototype of a motor with significantly reduced size of the biphasic induction motor, constituted by the short-circuit rotor. These engines also had a low yield. However, it impressed in a way that the US company Westinghouse bought the patent for a million dollars, and signed the agreement to pay a dollar for each machine that came to project in the future. However, the significantly reduced performance of this machine made its projection economically impossible, causing some years later, the searches were aborted.

Thus, electrical engineer Dobrowolsky of the company AEG, based in Berlin, insisting on the research of the AC motor has filed the patent application for a three-phase motor with cage rotor. The machine presented achieved a power of over fifty watts, an average yield of 80% over the power consumed and an excellent starting torque. The advantages of the cage-rotor engine compared to the direct current were expressive, with a simplified construction, quiet, reduced maintenance and great safety in operation. https://www.mrosupply.com/bearings/mounted-bearings/bearing-inserts/2256970_ar-3-112_sealmaster/

Protection Components

Reading time:

In the case of components used for the purpose of protection, it is possible to highlight the fuse, which basically refers to a wire or blade, duly designed on specific elements such as tin, silver, lead or alloy, inserted inside a porcelain body closed. It has an indicator, which aims to check whether it worked or not. It is a wire connected in parallel with the fuse element, which can release a spring acting on a platelet or screw, usually attached to the body cap. Fuses are the most common devices in use for short circuit protection in electrical systems.

Its operation is basically based on the fusing of the fuse element. This element is a simple conductor of a small cross section, which in turn, through its high resistance, undergoes a higher heating than the other conductors in the passage of the current. In this way, the fuses have in their interior, completely encased the element, with a granulated extinguishing material, using quartz sand of convenient granulometry. The fuse can be found in various forms. Due to the nominal current of the fuse, it has one or more wires or blades in parallel, with some sections of reduced section. https://www.mrosupply.com/ac-motors/explosion-proof-motors/702153_em7082t-i_baldor/

Load Inertia

Reading time:

From a broader point of view, the exact moment of inertia of the driven load is considered as one of the fundamental specifications and is of great importance in order to be able to carry out the verification through the acceleration time if the engine is able to drive the load always respecting the conditions required by the environment or the thermal stability of the insulation material. The moment of inertia is basically a measure of the resistance a body can offer to a change in its rotational motion relative to a given specific axis.

All factors vary according to the axis around which it is rotating, as well as the shape of the body and the way its mass is distributed. The unit of moment of inertia is exactly kgm2. The total moment of inertia of the system is the sum of the moments of inertia of the load and the motor SKF-Bearing 6309-2RS1. In the case of a machine which has a different rotation of the motor, for example, the case of pulleys or gears needs to be referred to the nominal speed of the motor. It is important to note that the total inertia of a load is an important factor in determining the acceleration time.

Application of Electromagnetism

Reading time:

The electric field found around a charged body is represented by invisible lines of force, which represent an invisible electric field, responsible for generating attraction and repulsion. Known as electrons, they are found on the outside of the atom and are easily displaced by the application of any external force. The electrons that are pushed to the outside of their orbits can cause the absence of electrons in the atom from which they emerge as well as great overload in the atom where they are to migrate. Thus, the lack of electrons can create a positive charge, considering that there are more protons than electrons, and the excess of electrons, can result in the creation of a negative charge.

If it is about electricity, the popular saying that opposites attract is true. In this way, all bodies that are charged electrically, contain a kind of invisible field around them. In the case that two bodies loaded with identical charges are put together, their electric fields may act to repel them, and if these two bodies are loaded with opposing charges and put together, their electric fields will act to attract them. https://www.mrosupply.com/motors/motor-base/27044_b254t_baldor/

Asynchronous Motors – Principle of Operation

Reading time:

In asynchronous electric motors the permanent magnet is suspended on a metal disk, secured by a pin in an iron bearing. The magnetic flux produced by the permanent magnet flows through the magnetic circuit series consisting of the permanent magnet, the air gap and the iron plate.

The disk under the magnet also rotates when the permanent magnet rotates. The disk accompanies the rotational movement of the permanent magnet due to the circulation of induced currents and these currents are induced due to the relative movement between the disk and the permanent magnet.

https://www.mrosupply.com/hydraulics-and-pneumatics/hose-reels/2517317_ez-e-hpl-350_coxreels/

Induced currents can produce, according to Lenz’s law, a magnetic south pole on the disk under the permanent magnet’s north magnetic spinning pole, as well as a magnetic north pole on the disk under the rotating magnetic south pole of the permanent magnet.

As the magnet rebuilds its movement relative to the disk, the induction of parasitic currents and magnetic poles with opposing polarities will continue. In this way the disk rotates in the same direction as the permanent magnet, but must rotate at a slower speed so that we have a relative velocity between the permanent magnet and the metal disk.

Limiting the starting current

Reading time:

In the case of a connection of the electric motors to a public electricity network, it is necessary to observe in detail the prescriptions for this purpose established by regulation. One must try to start a motor at full voltage in order to take full advantage of the starting torque.

When starting the full voltage of an electric motor causes a voltage drop higher than the maximum recommended, it is necessary to resort to a starting device with reduced voltage, always having the caution to analyze and to identify if the torque is sufficient so that it can activate the charge.

purpose motors cnl

There are two ways to reduce starting voltage by supplying current at normal voltage, causing the motor to be temporarily connected to the grid, with the winding to a higher voltage, using the star-delta starter system.

The other way is to provide current at a voltage below that recommended by resistors, inductors or autotransformer. All starting systems having reduced stress have, as opposed to the benefit of reducing the current, the disadvantage that the starting torque or torque will be reduced in proportion to the square of the voltage decrease offered to the motor.

Electric materials

Reading time:

Copper electric conductors are applied in the production of windings. Electric copper has a very high purity and is manufactured by the electrolysis process, acquiring a purity higher than 99%. The straight section of copper conductors to be installed in the grooves are rectangular or circular.

Normally, circular section conductors are produced in standard diameters up to a diameter of about 2.5mm to 3mm. The current density alternates between 3.5 and 15 A / mm2 depending on the ventilation system, number of starts per hour, and desired efficiency. High efficiency electric motors have lower current density characteristic.

duty motors 2017

If Acon em is higher than the straight section of the largest diameter of wire available, few conductors of smaller diameter are interconnected in parallel and coiled together. Up to 6 or 8 elementary conductors can be interconnected in this way.

If the Acon is above 30 to 40mm2 (ie 6 to 8 wires of 2.5mm2 in parallel), conductors of rectangular section are advised. In several countries, these drivers are also parameterized. Usually the height of rectangular conductors is lower compared to the width (a <3.5mm) to minimize the Skin effect.

 

Types of Couplings

Reading time:

There are different types of couplings used in the process of transmitting the torque from the motor to the driven machine. When using a coupling, it is necessary to observe some factors, such as the use of appropriate tools to assemble and disassemble the couplings, thus avoiding future engine damage. It is advisable to use couplings that are flexible and that can absorb small misalignments during the equipment step.

The maximum loads and speed limits that are provided in catalogs of couplings and motor manufacturers can not be exceeded. Performing the leveling and alignment of the engine is of paramount importance should occur periodically. Running engines that do not have attached drive elements must have their key fixed or removed in order to avoid possible accidents.

Baldor TPCRJ38CBSP

Direct coupling is characterized when the motor shaft is directly coupled to the axis of the driven load, without the use of transmission elements. Direct coupling is cheaper, safer against accidents and takes up less space. In the case of applications with direct coupling it is advisable to use ball bearings.

Electric Motor Winding

Reading time:

In an electric motor, coil is a roller that produces an electromagnetic field capable of carrying electricity, that is, it works as a conductor. The wire of a coil acts as an electromagnet. Among the various functions of a coil and its uses, an important application is the winding of electric motors. When the electric motor needs to start, for example, driving is through the coil.
There are problems and defects in the operation of electric motors and when these machines are faulty, it is necessary to work with caution in the winding.
The winding process of electric motors should bring better cost-benefit to the customer. For this, it takes time, planning and maintenance of the engines, with orientation and spare parts when necessary.

sealmaster products
The winding of electric motors must take place according to the manufacturer’s data on the number of coils per group and the connection between them, number of slots, type of winding, number of groups per phase, and wiring diagram.
During winding of electric motors, any damage to the stator should be avoided as much as possible. In case of need to change the coils, it is worth remembering that the size, the diameter and the number of coils must be conserved.

Control of Speed and Positioning of Electric Motors

Reading time:

The speed and position control of the electric motors is performed in feedback cycles, where the position and the speed of displacement create fundamental information for the management of the motor.

Electric motors applied in feedback cycles usually already come with sensing installed to their axis. In this case, the motor becomes known as “servomotor”, as it becomes a total “slave” of the feedback loop.

They are servo motors PN-35T of direct current and of alternating current. When acquiring the electrical signals from the sensors, the control module operates to change the electrical power of the motor. This is usually done by modifying the values ​​of the electrical voltages delivered to the motor or, also, by administering the time during which the motor receives these voltages.

Currently, the comparison element is elaborated by means of computer or, at least, with electronic instrument with computer characteristics. The computer must be adequate with a program capable of receiving signals (in the form of electrical voltages), comparing them with predetermined values ​​and returning signals to the control to take the essential actions in relation to the motor: starting, accelerating, decelerating, stopping, conforming the situation.

Types of DC Motors

Reading time:

The field and the inductance of DC electric motors can be connected in three different ways, which gives rise to three types of excitation:

  1. Motor with series excitation;
  2. Motor with parallel excitation;
  3. Motor with mixed excitation.

In the series-excited electric motor, the armature and field are connected in series, and the entire armature current also flows through the field. In this type of motor the flow depends on the current of the armature, then we affirm that the conjugate varies directly with the square of the current.

In the parallel excitation motor the field current independent of the armature current, this being the function of the load. When we need to vary the motor speed, we add a rheostat in series with the field.

The motor with mixed excitation has two fields, one in series and the other in parallel with the armature. Motor torque and speed are intermediate values ​​for series and parallel engines. When we have to control the speed, we act on the parallel field through the rheostat.

Mixed engines are used on machines that require a moderate initial engine, such as cranes. https://www.mrosupply.com/motors/ac-motors/general-purpose-motors/2840767_vedm3546_baldor/

Rated Voltage of Electric Motor

Reading time:

The nominal voltage is the working voltage that the electric motor has under normal conditions, and it should not be exceeded for very long periods of time, running the risk of damaging the motor.

Every motor shall be capable of operating perfectly when it is supplied with either a voltage 10% below or 10% above the rated voltage, provided the frequency is rated. However, the new standard NBR 7094 establishes a new guideline for the operation of the motor under frequency and voltage with deviations.

There are two zones (A and B) for the combination of frequency and voltage variations. The motor should be able to operate continuously in zone A, with some deviations and the temperature may also be higher.

morse C2080H B12 R/L

In zone B, the engine must be able to operate for a limited time, with deviations higher than those in zone A and with a higher temperature rise. In both operating zones the motor must be capable of having its rated torque.

Generally the electric motors are manufactured to operate at a maximum temperature of 40 degrees and a maximum altitude of 1000 m above sea level.

Types of DC Motors

Reading time:

In the mixed electric motor or compound the field coils are composed of two windings, which are mounted on the poles where the coils are fixed, one of which is a thick conductor and is connected in series with the armature, already The thin conductor is connected in parallel with the armature.

There are two types of compound, being the cumulative and the differential, and this will depend on the connection of the shunt winding and to reverse the types, simply inverting the shunt coil.

acme tf279266s

The compound connection is intended to combine the best of the shunt connection with the best of the series connection and with that we get excellent shunt engine speed regulation and the excellent starting torque of the series engine.

The cumulative composite motor is initially connected as series, but in parallel with the set – armature and winding series. The shunt winding should produce a magnetic field identical to the field produced by the series winding, with respect to the same direction and direction. We will have an engine with high torque at start, and with limited speed, however we will get it to have low speed variation, even varying the load.

Using the electric motor

Reading time:

The use of the electric motor has increased significantly in recent years, which allowed it to expand to serve increasingly different segments. We will still see more evolution of this machine and a greater use of it, even though it is a very efficient and economical machine for several follow-ups.

Industrial processes, elevators, vehicles and even home appliances make use of the engine. Of course there are other segments that also use and so we have to seek information about it so we can understand the great advantage of this engine. Today it is important to use the right model for the right application.

The function of the electric motor coxreels ez shw 175 is to transform electrical energy into mechanical energy based on the principle of electromagnetism, using internal structures suitable for this. When the electric motor is used this transformation can occur more economically and efficiently, especially when compared to other machines that perform the same function.

Corretor deve escolher a imobiliária que pretende trabalhar levando em conta alguns fatores

Reading time:

A imobiliária Osasco deve escolher para ter em sua equipe um funcionário que apresente características importantes e que seja bem-visto no mercado, porém essa lógica também se faz verdade quando chega a hora do corretor de imóveis escolher a imobiliária que ele quer trabalhar.

Para escolher a melhor imobiliária em Osasco para trabalhar, o corretor deve ter profundo conhecimento de sua nova equipe de trabalho, também é fundamental conhecer a estratégia de comercialização que a imobiliária trabalha e também como é feito o controle de estoque de imóveis que a imobiliária tem a sua disposição, pois esse controle deve apresentar: padrão dos imóveis que a imobiliária trabalha, a localização dos imóveis, a pretensão de venda, locação ou as duas opções e se os imóveis são destinados para fins rurais residenciais, comerciais ou outras opções.

Todas essas informações devem ser disponibilizadas para o corretor que as imobiliarias de osasco e região pretendem contratar, pois assim a imobiliária começará a construir uma relação profissional entre a empresa e o corretor.

Imobiliária evita dor de cabeça para proprietários de imóveis

Reading time:

Quando um pessoa decide vender ou alugar seu imóvel e está na dúvida entre fazer sozinho ou contratar os serviços de imobiliária Osasco é importante saber que contar com a ajuda de uma imobiliária será importante, pois assim o proprietário não correrá riscos.

O ideal é contar com uma imobiliária em Osasco para alugar ou vender um imóvel, pois o proprietário irá informar a imobiliária todas as condições do negócio que são: valor do imóvel ou do aluguel, número de cômodos, localização e outras informações.

veja mais imoveis

As imobiliárias em Osasco, por sua vez, deve oferecer um local onde ocorrerá a venda ou a locação do imóvel e será por meio de anúncios publicitários e placas em troca de uma porcentagem quando o negócio for fechado e o proprietário do imóvel receber esse valor.

Quem quer alugar ou comprar uma casam ou apartamento devem contatar uma imobiliária e as condições de negociação devem ser conferidas.

Oficina de jardinagem ajuda os convidados a fazerem sua própria lembrancinha

Reading time:

Oficina de jardinagem ajuda os convidados a fazerem sua própria lembrancinha durante a festa no buffet infantil

A festa realizada no buffet infantil em Moema deve ser algo inesquecível e marcante não só para o aniversariante como também para os convidados, pois é mais uma forma do buffet infantil conquistar novos clientes, tendo em vista que muitas crianças vão nas festas de aniversário.

Mães e pais têm optado por buffets infantis que oferecem oficinas que são divertidas. Essas oficinas permitem que os convidados e o aniversariante façam diversas coisas legais durante a festa e ao final podem levar tudo o que foi feito para casa como lembrança da festa no buffet infantil.

moema buffet

A oficina de jardinagem é uma ótima opção para manter as crianças entretidas durante toda a festa no buffet infantil, pois essa oficina ensina como as crianças devem cuidar das plantas e o que é importante fazer para que essas plantinhas tenham saúde.

As crianças irão colocar a mão na terra fazendo uso de roupas de jardineiros e aprenderão a cultivar suas próprias mudas e ao final da festa poderão levar como lembrança da festa no buffet infantil.

The greater the ability of the car engine, the greater its ability to carry loads

Reading time:

The power of the vehicles is directly linked to the car’s engine. Is the car engine that is responsible for making sure the cars are moved. The greater the ability of the car engine, the greater its ability either to transport loads and for speed.

When we say that a car engine is more potent than the other, this means that the first drive motor has higher load carrying capacity and still be able to reach high speeds.

The engine of a truck or a bus is more powerful than the car engine, because buses and trucks have to transport larger amount of power than the car. The sports car engine is also more powerful than the popular car engine, because their goal is always to achieve greater speed. nord gear 2016

Electric motor DC is the most used because it allows it done speed control

Reading time:

The DC electric motor is the most used because using the electric motor DC you can control the precise mode of operation speed. Despite having a high cost, the electric motor of direct current is used in special cases and those are cases when the requirements are the use of the application of the electric motor DC offsets the high cost of installation.

The DC electric motor EM4109T is used in the toy and automotive industry because its speed is always constant, the conjugate of the match is high. Since the electric motor used in the manufacture of radars also has a constant speed, but its starting torque is very weak. The elevator and mechanical traction devices keeps a variable speed as it is raised on empty, but the starting torque is high.

Learn more about the operation of the fuse and thermal relay in the electric motor

Reading time:

The departure of an electric motor can be considered as indirect or direct. The fuse and thermal relay should be electric motor connected in each series and the purpose of these two devices is to ensure that there is greater security when the electric motor will be connected and used in all the activities in which it is intended.

The electric motor JL3504A fuse consists of a metal which has a melting temperature which must be known. To be heated so means, the fuse that makes up the electric motor, melt and so the electric current will have its passage interrupted and it will mean that the phase of the electric motor was protected.

The thermal relay which is the electric motor is a device that senses when the temperature of the electric motor increases. The construction of the electric motor thermal relay is the use of bimetallic blades which undergo a deformation process and thus open the circuit in each phase of the electric motor so that it becomes warm, but not excessively. The thermal relay can always be reused, which makes this very interesting device because it has an interesting value for money.

Fiat Toro 2017

Reading time:

A marca italiana aos poucos começa a mostrar seu modelo de picape para 2017 de carro Bauru. A imagem divulgada mostrou um modelo bem robusto, ousado e sofisticado. Ela possui 4,915 metros de comprimento com capacidade para levar até 1 tonelada de carga mais 5 pessoas com muito conforto.

A Fiat lançou seu modelo de picape para concorrer diretamente com o Renaut Duster Oroch, Chevrolet S10 e Ford Ranger. O modelo está sendo produzido em uma fábrica em Pernambuco do Grupo FCA.

A picape vem com lanternas horizontais na parte traseira e tampa dupla na caçamba que abre para os dois lados. Nos modelos topo de linha as rodas são de 17 polegadas com pneus 245/45R17. O Fiat Toro oferece opções de motores de 1.8 E.torQ EVO Flex de até 132 cv e o motor 2.0 Multijet II turbodiesel de 170 cv com câmbio manual de 5 marchas e câmbio automático de 6 e 9 velocidades, além da opção de tração 4×4 para propulsor mais potente. bauru carros seminovos

De acordo com a marca, o modelo Fiat Toro 2017 é a estréia de um novo segmento o Sport Utility Pick-up (SUP) com características robustas, força de picape e conforto de um SUV.

Denúncia cheia ou vazia, quanto ao despejo?

Reading time:

A locação de imóveis urbanos é regida pela lei 8.245/91 (alterada pela lei 12.112/2009) e se realiza por meio de um contrato (escrito ou verbal) que poderá ser extinto por vários motivos como, por exemplo, o inadimplemento de uma das partes, o distrato, etc. De acordo com o que destacam as imobiliárias de Bauru.

A denúncia vazia ou denúncia imotivada é a retomada do imóvel por seu locador, após o término do prazo de locação fixado em contrato escrito, com prazo igual ou superior a 30 meses, sem justificativa do pedido.

A denúncia cheia ocorre quando o contrato for ajustado verbalmente ou por escrito por prazo inferior a 30 meses. Findo o prazo estabelecido na imobiliaria, a locação é prorrogada automaticamente, por prazo indeterminado e somente poderá ser retomado o imóvel pelo locador se:

  • em decorrência de extinção do contrato de trabalho, a ocupação do imóvel pelo locatário, era relacionada ao seu emprego;
  • se for pedido para uso próprio, de cônjuge ou companheiro, para uso residencial, caso não possua outro imóvel próprio residencial;
  • se for pedido para demolição e edificação licenciada ou para obras aprovadas pelo poder público, que aumentam a área construída, e
  • se a vigência da locação ultrapassar cinco anos.

Key features of the three-phase motor winding rotor

Reading time:

It is an electric motor model that has important features and functionality as an excellent start and a low-intensity starting current which, by the way, has a value of one and a half compared to the rated current.

This type of motor CR20IP1 is characterized by high touch of starting and speed control. On the other hand has need rheostat of great power, and require more maintenance than the rotor squirrel cage induction motors.

This, in turn, is very efficient and does not require many maintenance care. The question speed regulation and reversing, are carried out by moving a set of brushes, it causes a variation in the induced voltage in the rotor windings.

The three-phase induction motor is recognized by the laminate collector and is much used in situations which are necessary to give starting under heavy loads, for example, elevators, calenders.

Prohibit cell phone use after bedtime

Reading time:

Wholesale cell is seen as a simple conversation device, useful in times of emergency, but young people today use the modern means of communication so that parents or idealize. wholesale cell phone accessories

Excessive fatigue of cases reported by young people were cominados abuse in the use of the cell, both as links in text message exchanges. They spend a lot of time connecting with others, and some of them make it through the night.

On the other direction, a better school performance is related to a good night’s sleep. Studies show that teens who sleep less are more prone to cognitive or behavioral problems in the classroom. Parents should be alert: it is necessary to reduce or prohibit the use of wholesale cell after bedtime.

Connoisseurs recommend that children and adolescents have between eight and ten hours of sleep each night to maintain a healthy life and good performance during the day. In addition, parents who suspect that their children are suffering from sleep disorders.

Android 6.0: What are the main features and improvements for your phone

Reading time:

The new version of Android system also known as Marshmallow presents some new features as well as changes that may surprise those who are already familiar with the operating system.

slide out keyboard for iphone

Now you can follow in the cell itself, the version and date of the last update of the system as “Android Security Package Level” which is in Device settings. Another change was the official easter egg now has as the evil Marshmallow obstacles, whose access path is “System Settings”, click “About phone” and then version of Android.

To find out which are the most accessed applications is only observe the top of the apps drawer, since the navigation is done vertically, similar to that performed with the widget. Now one of the most interesting news is the resource “Now on Tap” which works like this: just hold the home button for the system to scan the data that appear on the screen and thus will be offered various ways of interaction that will greatly access and experience on the mobile.

2015 best cell

Reading time:

Wholesale cellphone is a technology that few people can do without these days. And the more complete the better it is, users want to use the device to have access to just about everything everyday.

Many things can solve only by accessing the cell wholesale chargers, it can access the Internet, social networking, applications that send timely messages and other features.

If you want to have one of the best phones 2015 check which fall in this segment. They are regarded as the best because they have latest quality technology, attractive design, and other details that make them be the best available in the market:

  • Samsung Note 4
  • 6 Iphone
  • Lumia 550
  • Xperia Z3
  • LG G3
  • Samsung GALAXY S6

Because they are excellent devices the cost of them are also high. Before buying, look for comparing prices at different stores so you can find one that has a more affordable price. The payment always count too, both physically and in the online store.

Electric motor increases durability when insulators are well maintained

Reading time:

Thermal insulation are components that are closely linked to life of the electric motor, because if the electric motor suffers an overheating is the thermal insulation that will degrade first.

Among the many reasons that involve the degradation of thermal insulation that makes up the electric motor are: dust they become and end up forming conductive bridges, gas attack or acids that are brought into the insulation through the ventilation line voltage, or , overcurrent in the matches. pc13-5012-a and much more

For the thermal insulation last longer and do not compromise the electric motor is necessary that when the electric motor stops the coils of the windings are cleaned filters are installed in the system that is responsible for the ventilation of the motors and these filters receive proper maintenance, electric motor should always remain in a healthy place and keep close attention if the motor release some sort of smoke.

Automotive electric motor is cheaper maintenance

Reading time:

Low cost. This is the main feature of the car which has an electric motor because the car has an electric motor need not be stocked with alcohol or gasoline, which are fuels produced base oil or sugar cane and these prices vary by US dollar or the sugarcane harvest.

Another factor that makes a car with electric motor is cheaper is the cost of maintaining, for a car with electric motor does not have leakage, do not need to put oil every x number of kilometers traveled, and also hoses.

Brazil is a country that should focus on the use of the electric motor vehicle 81100, it is the electric motor that will help to preserve the environment given that Brazil is already a country that can produce clean energy despite facing a crisis water and economic crisis.